Resolvers

• Selection
  • Static
  • Dynamic
• Implementations
  • FilesystemResolver
  • HttpResolver
  • JdbcResolver
  • AmazonS3Resolver
  • AzureStorageResolver

Resolvers locate and provide access to source images. A resolver translates an identifier in a request URL to an image locator, such as a pathname, in the particular type of underlying storage it is written to interface with. It can then check whether the underlying object exists and is accessible, and if so, provide access to it to other image server components. The rest of the image server does not need to know where an image resides, be it on the filesystem, in a database, on a remote web server, or in cloud storage—it can simply ask the current resolver, whatever it may be, to provide a Java object from which an image can be read.

The Java object in question may be a stream, or a file. All resolvers can provide stream access, but only FilesystemResolver can provide file access. This distinction is important because not all processors can read from streams.

Selection

In a typical configuration, one resolver will handle all requests. It is also possible to configure the image server to select a resolver dynamically upon each request depending on the image identifier.

Static Resolver

When the resolver.static configuration key is set to the name of a resolver, Cantaloupe will use that resolver for all requests. This is simple and should work in most scenarios.

Dynamic Resolvers

When a static resolver is not flexible enough, it is also possible to serve images from different sources simultaneously. For example, you may have some images stored on a filesystem, and others stored on Amazon S3. If you can differentiate their sources based on their identifier in code—either by analyzing the identifier string, or performing some kind of service request—you can use the delegate script mechanism to write a simple Ruby method to tell the image server which resolver to use for a given request.

To enable dynamic resolver selection, set the resolver.delegate configuration key to true. Then, implement the get_resolver(identifier) method in the delegate script, which takes in an identifier and returns a resolver name (such as FilesystemResolver, HttpResolver, etc.) For example:

module Cantaloupe
  def self.get_resolver(identifier)
    # Here, you would perform some kind of analysis on `identifier`:
    # parse it, look it up in a web service or database...
    # and then return the name of the resolver to use to serve it.
    'FilesystemResolver'
  end
end

See the Delegate Script section for general information about the delegate script.

Implementations

FilesystemResolver

FilesystemResolver maps a URL identifier to a filesystem path, for retrieving images on a local or attached filesystem. In addition to being the most compatible resolver, this is also the most efficient resolver and may or may not be the only option for serving very large source images.

For images with extensions that are missing or unrecognized, this resolver will check the "magic number" to determine type, which will add some overhead. It is therefore slightly more efficient to serve images with extensions.

FilesystemResolver supports two distinct lookup strategies, defined by the FilesystemResolver.lookup_strategy configuration option.

BasicLookupStrategy

BasicLookupStrategy locates images by concatenating a pre-defined path prefix and/or suffix. For example, with the following configuration options set:

# Note trailing slash!
FilesystemResolver.BasicLookupStrategy.path_prefix = /usr/local/images/
FilesystemResolver.BasicLookupStrategy.path_suffix =

An identifier of image.jpg in the URL will resolve to /usr/local/images/image.jpg.

To prevent arbitrary directory traversal, BasicLookupStrategy will strip out ..{path separator} and {path separator}.. from identifiers before resolving the path.

ScriptLookupStrategy

Sometimes, BasicLookupStrategy will not offer enough control. Perhaps you want to serve images from multiple filesystems, or perhaps your identifiers are opaque and you need to perform a database or web service request to locate the corresponding images. With this lookup strategy, you can tell FilesystemResolver to invoke a method in your delegate script and capture the pathname it returns.

The delegate script method, get_pathname(identifier), will take in an identifier and should return a pathname, if available, or nil, if not. A Solr query, for example, could look like:

require 'net/http'
require 'cgi'

module Cantaloupe
  module FilesystemResolver
    def self.get_pathname(identifier)
      uri = 'http://localhost:8983/solr/collection1/select?q=' +
          CGI.escape('id:"' + identifier + '"') +
          '&fl=pathname_si&wt=ruby'
      uri = URI.parse(uri)

      http = Net::HTTP.new(uri.host, uri.port)
      request = Net::HTTP::Get.new(uri.request_uri)
      response = http.request(request)
      return nil if response.code.to_i >= 400

      results = eval(response.body)['response']['docs']
      results.any? ? results.first['pathname_si'] : nil
    end
  end
end

See the Delegate Script section for general information about the delegate script.

HttpResolver

HttpResolver maps a URL identifier to an HTTP or HTTPS resource, for retrieving images from a web server.

It is preferable to use this resolver with source images with recognizable file extensions. For images with an extension that is missing or unrecognizable, it will issue an HTTP HEAD request to the server to check the Content-Type header. If the type cannot be inferred from that, an error response will be returned.

HttpResolver supports two distinct lookup strategies, defined by the HttpResolver.lookup_strategy configuration option.

BasicLookupStrategy

BasicLookupStrategy locates images by concatenating a pre-defined URL prefix and/or suffix. For example, with the following configuration options set:

# Note trailing slash!
HttpResolver.url_prefix = http://example.org/images/
HttpResolver.url_suffix =

An identifier of image.jpg in the URL will resolve to http://example.org/images/image.jpg.

ScriptLookupStrategy

Sometimes, BasicLookupStrategy will not offer enough control. Perhaps you want to serve images from multiple URLs, or perhaps your identifiers are opaque and you need to run a database or web service request to locate them. With this lookup strategy, you can tell FilesystemResolver to invoke a method in your delegate script and capture the URL it returns.

The delegate script method, get_url(identifier), will take in an identifier and should return a URL, if available, or nil, if not. See the Delegate Script section for general information about the delegate script, and the FilesystemResolver ScriptLookupStrategy section for an example of a similar script.

JdbcResolver

JdbcResolver maps a URL identifier to an RDBMS BLOB field, for retrieving images from a relational database. It does not require a custom schema and can adapt to any schema. The downside of that is that some delegate script methods must be implemented in order to obtain the information needed to run the SQL queries.

Cantaloupe does not include any JDBC drivers, so a driver JAR for the desired database must be obtained separately and saved somewhere on the classpath.

The JDBC connection is initialized by the JdbcResolver.url, JdbcResolver.user, and JdbcResolver.password configuration options. If the user or password are not necessary, they can be left blank. The connection string must use your driver's JDBC syntax:

jdbc:postgresql://localhost:5432/my_database
jdbc:mysql://localhost:3306/my_database
jdbc:microsoft:sqlserver://example.org:1433;DatabaseName=MY_DATABASE

Consult the driver's documentation for details.

Then, the resolver needs to be told:

1. The database value corresponding to a given identifier
2. The media type corresponding to that value
3. The SQL statement that retrieves the BLOB value corresponding to that value

Database Identifier Retrieval Method

This method takes in an unencoded URL identifier and returns the corresponding database value of the identifier.

module Cantaloupe
  module JdbcResolver
    get_database_identifier(url_identifier)
      # If URL identifiers map directly to values in the database, simply
      # return url_identifier. Otherwise, you could transform it, perform
      # a service request to look it up, etc.
      url_identifier
    end
  end
end

Media Type Retrieval Method

This method returns a media (MIME) type corresponding to the value returned by the get_database_identifier method. If the media type is stored in the database, this example will return an SQL statement to retrieve it.

module Cantaloupe
  module JdbcResolver
    def get_media_type
      'SELECT media_type ' +
          'FROM some_table ' +
          'WHERE some_identifier = ?'
    end
  end
end

If the URL identifier will always have a known, valid image extension, like .jpg, .tif, etc., this method can return nil, and Cantaloupe will infer the media type from the extension.

BLOB Retrieval SQL Method

The get_lookup_sql method returns an SQL statement that selects the BLOB value corresponding to the value returned by the get_database_identifier method.

module Cantaloupe
  module JdbcResolver
    def get_lookup_sql
      'SELECT image_blob_column '
          'FROM some_table '
          'WHERE some_identifier = ?'
    end
  end
end

AmazonS3Resolver

AmazonS3Resolver maps a URL identifier to an Amazon Simple Storage Service (S3) object, for retrieving images from Amazon S3. It can be configured with the following options:

AmazonS3Resolver.access_key_id

An access key associated with your AWS account. (See AWS Security Credentials.)

AmazonS3Resolver.secret_key

A secret key associated with your AWS account. (See AWS Security Credentials.)

AmazonS3Resolver.bucket.name

Name of the bucket containing the images to be served.

AmazonS3Resolver.bucket.region

Name of a region to send requests to, such as us-east-1. Can be commented out or left blank to use a default region. (See S3 Regions.)

AmazonS3Resolver.lookup_strategy

The strategy to use to look up images based on their URL identifier. See below.

BasicLookupStrategy

BasicLookupStrategy locates images by passing the URL identifier as-is to S3, with no additional configuration necessary or possible.

ScriptLookupStrategy

When your URL identifiers don't match your Amazon S3 object keys, ScriptLookupStrategy is available to tell AmazonS3Resolver to capture the object key returned by a method in your delegate script.

The delegate script method, get_s3_object_key(identifier), will take in an identifier and should return an S3 object key string, if available, or nil, if not. See the Delegate Script section for general information about the delegate script, and the FilesystemResolver ScriptLookupStrategy section for an example of a similar script.

AzureStorageResolver

AzureStorageResolver maps a URL identifier to a Microsoft Azure Storage blob, for retrieving images from Azure Storage. It can be configured with the following options:

AzureStorageResolver.account_name

The name of your Azure account.

AzureStorageResolver.account_key

A key to access your Azure Storage account.

AzureStorageResolver.container_name

Name of the container from which to serve images.

AzureStorageResolver.lookup_strategy

The strategy to use to look up images based on their URL identifier. See below.

BasicLookupStrategy

BasicLookupStrategy locates images by passing the URL identifier as-is to Azure Storage, with no additional configuration necessary or possible.

ScriptLookupStrategy

When your URL identifiers don't match your Azure Storage blob keys, ScriptLookupStrategy is available to tell AzureStorageResolver to capture the blob key returned by a method in your delegate script.

The delegate script method, get_azure_storage_blob_key(identifier), will take in an identifier and should return a blob key string, if available, or nil, if not. See the Delegate Script section for general information about the delegate script, and the FilesystemResolver ScriptLookupStrategy section for an example of a similar script.